- Robotic Vacuum Cleaner
- Wet and Dry Cleaning
- Ideal For: Home | Office
- Non Woven Fabric Dust Tank, Suction Power: 2200 Pa
- 24 Months Warranty
- Robotic Vacuum Cleaner
- Venii Max
The Milagrow iMap Venii Max Robotic Vacuum Cleaner comes with RT2R Technology to give perfect cleaning experience. Real time terrain recognition technology with LDS Lidar and SLAM. It is the same technology which is used in unmanned vehicles and helps the robot to be fully independent in terms of navigation. It is the ultimate in robotic mapping technology and is much faster and accurate than any other mapping like Camera based VSLAM or Gyro mapping. It has NIDEC Brushless motor, which has 2200 Pa suction power, maximizes the cleaning power with the main brush. It comes with Alexa and Google Assistant support. The dustbin size is of 1000 ml. It comes with 5200 mAh battery. The working time is of 60-130 minutes.
The Milagrow iMap Venii Max Robotic Vacuum Cleaner comes with 3 HEPA 12 filters. Filter Efficiency HEPA 12 - 99.97 percent at 0.3 micron. 99.5 percent efficiency upto 0.1 micron. They can filter out impurities and particles in the air, such as viruses, respirable dust, mites eggs and excretions, mold, dust, allergens, pollen, bacteria, dust mites or cigarette smoke, asbestos, various toxic dusts and aerosols from the air, dander, allergens from the fur of dogs or cats. Virions (or “particles”) of COVID19 are spherical particles between 0.06 micron and 0.14 micron in diameter, averaging about 0.125 micron, measured by electron microscope (Zhu et al, 2020). This means that coronavirus particles are smaller than PM2.5, but larger than some dust and gas particles. It comes with Wi-Fi support.
The Milagrow iMap Venii Max Robotic Vacuum Cleaner comes with 2 water tanks. Both 800 ml each. One for clean water and one for sewage water. The clean water can take normal disinfectants as well as sodium hypochlorite 1% solution. The robot comes back after cleaning a certain area which you set for it and self cleans itself. The clean water tank sprinkles water on the mop and the scrubbers scrub every pc of dirt from it with a pressure of 40 Newtons. The wet mopping is done with a pressure of 10 Newtons to remove stubborn dirt and stains. It automatically senses the carpets and when the robot climbs on top of it the mopping attachment is folded up to prevent the dirtying or wetting of the carpet.