- Large LCD Display with Back Light
- Hold down the CH Channel button for 5 seconds
- 2.4GHz RF Radio System
- Wireless Shutter Release
- Remote Flash Zoom
- DSLR Camera
Compatible Model Series/Number
- Not Available
Flash photography is an art in and of itself. Camera flashes are an indispensable accessory for many photographers providing myriad benefits like providing additional light when conditions become too dark to handhold your camera comfortably, allowing you to achieve more balanced exposures in daylight conditions, permitting freezing of fast-moving subjects as well as using it to control other flash light sources. Additionally, a flash can be used as a highly effective creative tool to establish an aesthetic that elevates your imagery when lighting conditions are considered less than stellar. Flashes can be controlled wirelessly, allowing you to move your flash off-camera and light your subject from a different angle. There are three primary techniques for wirelessly triggering flashes including optical, infrared and radio. Expand your wireless flash system with the Godox X1T-C 2.4G Wireless Flash Trigger Transmitter for Canon which is a radio flash trigger. Because it uses radio waves instead of light waves, it has a greater range and will continue to work even if someone walks between the master and the slave.
The 2.4 GHz system of the Godox X1T-C 2.4G Wireless Flash Trigger Transmitter is compatible with Canon cameras and flashes that support E-TTL for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. Fully supporting TTL functions for Canon, through E-TTL compatibility, the receiver will support high-speed sync (HSS 1/8000s), flash exposure compensation (FEC), and flash exposure lock (FEL), among other settings. Versatile functions such as synchronization delay setting, wireless shutter release, zoom setting, and modeling flash control are supported.
Wireless Remote Control and Grouping System
The Godox X1T-C 2.4G Wireless Flash Trigger Transmitter also has an outstanding range of 100m + and can be set to one of 32 channels for limiting interference with other nearby systems. Another huge benefit is the ability to control up to five groups at a time or set the unit to ratio flash mode for three groups with varying power relative to one another.
One can have access to many settings through the backlit LCD found on the rear of the receiver. This enables the adjustment of settings such as HSS Delay Setting – 0-9.9ms, (100us Increments) and triggering modes. Beyond this, users will be able to easily mount their flash to the receiver's top hot shoe, or connect a camera or studio strobe via the 2.5mm sync terminal. Additionally, the receiver runs on two AA batteries and has a micro-USB port for firmware updates. There is also a useful memory function where settings will be stored 2 seconds after the last operation and can be recovered after a restart.