What is a twin tub washing machine, how to use it?

Washing machines have come a long way, but one classic design that’s still going strong is the twin tub washing machine. Also known as a semi-automatic washing machine, it has two separate tubs, one for washing and the other for spinning or drying. Unlike fully automatic machines, you’ll need to move your clothes from one tub to the other yourself. But in return, you get a more budget-friendly option that uses less water and washes clothes faster. 

Thanks to their practicality and affordability, twin-tub machines are still popular in many homes. So, what exactly is a twin-tub washing machine, and how do you use one? Here’s everything you need to know.

Everything about twin tub wasing machine

Using a twin-tub washing machine takes a little more effort than a fully automatic one, but it gives you more control over your laundry. If you’re new to it, don’t worry as it’s pretty simple once you get the hang of it. Here’s a step-by-step guide on how to use a twin-tub washing machine:

1. Fill the wash tub with water

Start by filling the wash tub with water. Most twin-tub machines have a built-in water inlet, but if yours doesn’t, you’ll need to use a bucket. Adjust the water level based on how big or small your laundry load is, more water for bigger loads, less for smaller ones. Some machines also let you choose between hot and cold water, so pick what’s best for your clothes.

2. Add detergent and load your clothes

Pour your preferred detergent into the wash tub and let it dissolve. Then, add your clothes, making sure not to overload the tub. Clothes need space to move freely for a thorough wash, so if you’re cramming them in, they won’t get as clean.

ALSO READ: How to sort laundry before washing clothes

3. Set the wash timer and select the wash mode

Use the control panel to choose the right wash time and mode. If you’re washing delicate fabrics, go for a gentler cycle. For heavily soiled clothes, set a longer wash time to ensure they come out clean. The machine will agitate the clothes, mixing the detergent and water to break down dirt and stains.

4. Drain the dirty water

Once the wash cycle is done, drain out the soapy water using the washing machine’s drain hose. Some twin-tub washing machines have a built-in pump to remove water, while others require you to lower the hose to let gravity do the work. Make sure all the dirty water is out before moving to the next step.

ALSO READ: Is it possible to reuse washing machine water?

5. Rinse the clothes with clean water

Refill the wash tub with fresh water and run a quick rinse cycle to remove any leftover detergent. For a thorough rinse, you might need to drain and refill the tub a couple of times. If your machine has a manual rinse setting, use it to speed up the process.

6. Transfer clothes to the spin tub

After rinsing, move your clothes to the spin tub. Make sure to spread them evenly so the machine doesn’t shake too much during spinning. Close the lid and set the spin timer. The spin tub removes excess water, which helps cut down drying time.

Even after spinning, your clothes will still be slightly damp. Hang them up on a clothesline or drying rack to air dry completely. And that’s how you use a twin-tub washing machine!

ALSO READ: How to wash different types of stains

It might take a few extra steps compared to a fully automatic washing machine, but a twin-tub machine gives you more control, uses less water and electricity, and gets your laundry done faster.